LED Mirror Installation Guide

Introduction

LED mirrors are not only stylish but also offer excellent lighting for your bathroom or vanity area. Installing an LED mirror can enhance the look and functionality of your space. In this guide, we will walk you through the installation process step by step.

Materials Needed

• • LED mirror
• • Screwdriver
• • Wall anchors (if required)
• • Level
• • Electrical tape
• • Wire stripper
• 

Important Notes

• • Please read carefully and save these instructions.
• • Don’t discard any of the packaging until you are sure that you have all of the parts and the fittings.
• • Make sure the main power must be cut off before installation.
• • This product contains glass parts. Care must be taken when fitting or handling these parts to prevent personal injury or damage to the products; if the glass is broken, please stop using it and replace it from agent or manufacturer.
• • Ensure the mounting surface is dry and strong enough to bear four times the weight of fixture for the safe fitting of this fixture.
• • Care must be taken before drilling fixing holes to avoid any existing wiring or pipe work that may be concealed.

Installation Steps

1. 1. Unpack and Prepare
   • • Carefully unpack the LED mirror. Inspect all parts to ensure nothing is damaged or missing.
   • • Gather the tools needed such as a screwdriver, wall anchors (if required), level, electrical tape, and wire stripper. 
2. 2. Mark Positions
   • • Hold the mirror hanger against the wall at the desired location. Use a level to ensure it is perfectly horizontal.
   • • Mark the positions of the screw holes through the wall hanger and also mark the position of the “T”. Double-check that the hanger is level at all points.
   • 
3. 3. Drill Holes and Insert Plugs
   • • Using a drill with an appropriate bit size, carefully drill the marked holes.
   • • Insert the plastic plugs into the drilled holes. Make sure they are firmly seated. 
   •  
4. 4. Fix Hanger
   • • Align the hanger with the holes and screws. Fix the hanger on the wall by inserting screws through the hanger and into the plastic plugs.
   • • Twist the “T” nail to the wall, ensuring it remains level. Check for stability. 
5. 5. Connect Cable
   • • Examine the provided cable and wire connectors.
   • • Using the wire stripper if necessary, carefully strip the ends of the wires.
   • • Connect the cable by the screw-on wire connectors as follows: Black wire to Live Terminal ( L ), White wire to Neutral Terminal ( N ), Green wire to Earth Terminal ( E ) (120V, 60Hz). Use electrical tape to secure the connections properly. 
6. 6. Hang Mirror
   • • Carefully lift the LED mirror and hang it on the hanger.
   • • At the same time, insert the “T” nail into the safety hole at the bottom of the mirror on the back.
   • • Use the provided spanner to lock the mirror securely in place. Check for stability and levelness.

Safety Precautions During Installation

• • Electrical Safety: Before making any electrical connections, always turn off the main power supply to prevent electric shock. When connecting wires, ensure correct color coding is followed (black wire to Live Terminal (L), white wire to Neutral Terminal (N), green wire to Earth Terminal (E)). Use electrical tape to secure wire connections properly to avoid short circuits or electrical leakage.
• • Glass Component Safety: As the LED mirror contains glass parts, handle them with care during installation to prevent personal injury or damage. If the glass is broken, stop using the mirror immediately and contact the agent or manufacturer for replacement.
• • Installation Surface Safety: Ensure the mounting surface is dry and strong enough to bear four times the weight of the fixture for safe installation.
• • Drilling Safety: Before drilling fixing holes, be careful to avoid any existing wiring or pipe work that may be concealed within the wall.
• • Tool Usage Safety: When using tools such as screwdrivers and wrenches, ensure they are in good condition and used correctly to avoid hand injuries.
• • General Safety: Always follow the manufacturer's installation instructions carefully. If unsure about any step of the installation process, consult a professional.

Maintenance

Wipe clean with a soft damp cloth. Never use abrasives or chemical cleaners as these could damage the finish.

Video Tutorial

For a more detailed visual guide, watch our installation video tutorial below.

Tips for a Successful Installation

• • Always follow the manufacturer's instructions carefully.
• • Use proper safety precautions when working with electricity.
• • If you are unsure about any step of the installation process, consult a professional.

Conclusion

Installing an LED mirror can be a simple and rewarding project. By following these steps and using the right tools and materials, you can enjoy the beauty and functionality of your new LED mirror in no time.